MediaPack 114 analog VoIP gateway with 4 FXS ports

The AudioCodes MediaPack™ Series of analog VoIP gateways are cost-effective, best-of-breed technology products. These stand-alone gateways provide superior voice technology for connecting legacy telephones, fax machines and PBX systems with IP-based telephony networks, as well as for integration with IP PBX systems

Please log in or register to view additional details about this product

SKU: MP114/4S/SIP Category:
MFR Audiocodes
SKU MP114/4S/SIP

Care/Warranty

SKU: MP114/4S/SIP
Category:
Item Type: Hardware
Warranty : 1 Year Warranty
Brochure: Link
Item requires renewal : No

Description

Media Capabilities
Voice Coders 
G.711 (A-law and µ-law), G.723.1, G.726, G.727, G.729A/B, G.722

VoIP Features 
G.168-2004 echo cancellation, silence detection and comfort noise generation, dynamic programmable jitter buffer

Call Progress Tones 
Programmable detection and generation tones, pre-recorded tones generation

DTMF 
In-band and out-of-band signaling, RFC 2833, SIP INFO/NOTIFY

Fax Over IP 
Group 3/super G3 fax over IP, T.38 relay, automatic switching to G.711

IP Networking and Telephony Protocols
VLAN 
802.1 p/Q VLAN tagging

IP Transport 
IPV4/IPV6*, DiffServ, TOS

Control Protocols 
SIP (RFC 3261) over UDP, TCP and TLS (1.2)

Media Protocols 
RTP (RFC 3550), SRTP (RFC 3711), RTCP (RFC 3550), RTCP-XR (RFC 3611)

Management Protocols
OAM&P
• Web GUI, SSH/Telnet, SNMP v2/v3, INI file
• AudioCodes’ One Voice Operation Center
• User authentication and access control via RADIUS

Automatic Configuration
Zero-touch provisioning 
Configuration/firmware download via HTTP(s), FTP and TFTP
DHCP-based provisioning – options 66, 67 and 160
VLAN ID discovery using LLDP

Voice Menu 
Basic configuration using standard touch-tone phone (MP-11x only)

Survivability During Network Failure 
PSTN Fallback 
PSTN fallback upon power failure, IP connection failure, customer-defined IP QoS thresholds (MP-114 and MP-118)

Survivability 
Stand Alone Survivability (SAS) for 25 SIP users

Analog Telephony Features
3-Way Conference 
On-board 3-way conference

MWI 
Message Waiting Indication: High (neon) and low (LED) voltage, FSK, stutter dial tone

Caller ID 
Bellcore GR-30-CORE Type 1 using Bell 202 FSK modulation, ETSI Type 1, NTT, Denmark, India, Brazil, United Kingdom and DTMF ETSI CID (ETS 300-659-1)

Polarity Reversal/Wink 
Immediate or smooth to prevent erroneous ringing
Metering Tones 12/16 KHz sinusoidal bursts, generation on FXS

Distinctive Ringing 
By frequency (15-100 Hz) and cadence patterns

Subscriber Line Interface
Ring Voltage 
Sine: 54 VRMS typical (balanced ringing only)

Ring Frequency 
25-100Hz

Maximum Ringer Load 
REN3

Loop Impedance 
Up to 1,500 ohm for the MP-11x, up to 1,600 ohm for the MP-124 (including phone impedance)

Line Current 
Up to 32 MA on 4 ports